This article will show you how to remove the speed limiter from an EZGO golf cart. This is a common problem for golf cart owners who want to increase the speed of their carts.

Tools and materials you will need:

Phillips head screwdriver
10mm wrench
Needle nose pliers

Step-by-step instructions:

Locate the speed limiter on the golf cart. It is usually located under the seat.
Remove the two Phillips head screws that hold the speed limiter in place.
Use the 10mm wrench to loosen the two bolts that hold the speed limiter in place.
Use the needle nose pliers to remove the two plastic tabs that hold the speed limiter in place.
Remove the speed limiter from the golf cart.

Potential risks and complications:

If you are not comfortable working on your golf cart, you should have a qualified technician perform this procedure.
There is a risk of damaging the golf cart if you do not follow the instructions carefully.

FAQ:

Q: What will happen if I remove the speed limiter?
A: Your golf cart will be able to go faster.
Q: Is it legal to remove the speed limiter from my golf cart?
A: It depends on the laws in your area. In some areas, it is illegal to remove the speed limiter from a golf cart.

Conclusion:

Removing the speed limiter from an EZGO golf cart is a relatively simple procedure. However, there are some risks involved, so you should make sure that you understand the risks before you proceed.

Resources:

Feature	Answer
Golf cart speed limiter	A device that limits the speed of a golf cart
EZGO golf cart	A brand of golf cart
How to remove golf cart speed limiter	Instructions on how to remove a speed limiter from an EZGO golf cart
Golf cart speed control	A device that allows you to control the speed of a golf cart
EZGO golf cart speed limiter removal	Instructions on how to remove a speed limiter from an EZGO golf cart

how to remove speed limiter on ezgo golf cart

II. What is a speed limiter?

A speed limiter is a device that limits the maximum speed of a golf cart. It is typically installed by the manufacturer to prevent the cart from going too fast, which can be dangerous.

Speed limiters can be mechanical or electronic. Mechanical speed limiters use a governor to limit the speed of the engine, while electronic speed limiters use a computer to control the speed of the cart.

Speed limiters are typically set at a maximum speed of 15 mph, but some models may have a higher or lower limit.

III. Why would you want to remove a speed limiter?

There are a few reasons why you might want to remove the speed limiter on your EZGO golf cart.

You may want to increase the speed of your cart so that you can travel faster on the golf course.
You may want to be able to use your cart on other types of terrain, such as on a dirt road or in a parking lot.
You may simply want to have more control over the speed of your cart.

It is important to note that removing the speed limiter on your EZGO golf cart can void your warranty. It can also make your cart less safe to operate, so it is important to weigh the risks and benefits before making a decision.

IV. How to remove a speed limiter from an EZGO golf cart

To remove a speed limiter from an EZGO golf cart, you will need the following tools and materials:

A 10mm socket
A 12mm socket
A Phillips head screwdriver
A flathead screwdriver
A pair of pliers
A wire brush
A can of electrical contact cleaner

Once you have gathered your tools and materials, follow these steps to remove the speed limiter:

Locate the speed limiter on the golf cart. It is typically located under the seat, near the battery.
Remove the two 10mm bolts that hold the speed limiter in place.
Disconnect the two electrical connectors from the speed limiter.
Use a wire brush to clean the contacts on the speed limiter.
Apply a coat of electrical contact cleaner to the contacts.
Reattach the two electrical connectors to the speed limiter.
Replace the two 10mm bolts that hold the speed limiter in place.

Once you have reinstalled the speed limiter, test the golf cart to make sure that it is running at the desired speed.

V. Tools and materials you will need

To remove a speed limiter from an EZGO golf cart, you will need the following tools and materials:

A 10mm socket wrench
A 12mm socket wrench
A Phillips head screwdriver
A flathead screwdriver
A set of needle-nose pliers
A wire cutter
A multimeter

VI. Step-by-step instructions on how to remove a speed limiter

To remove a speed limiter from an EZGO golf cart, you will need the following tools and materials:

A Phillips head screwdriver
A 10mm socket wrench
A 12mm socket wrench
A flathead screwdriver
A pry bar
A multimeter

Once you have gathered your tools and materials, follow these steps to remove the speed limiter:

Locate the speed limiter on the golf cart. It is typically located near the front axle.
Disconnect the battery cables from the battery.
Remove the two Phillips head screws that hold the speed limiter in place.
Remove the two 10mm bolts that hold the speed limiter to the frame.
Remove the two 12mm bolts that hold the speed limiter to the axle.
Pry the speed limiter off of the axle.
Inspect the speed limiter for damage. If the speed limiter is damaged, replace it with a new one.
Reconnect the battery cables to the battery.

Once you have completed these steps, the speed limiter will be removed from the golf cart.

VII. Potential risks and complications

When removing a speed limiter from an EZGO golf cart, there are a few potential risks and complications that you should be aware of.

Electrical shock. The speed limiter is connected to the electrical system of the golf cart, so there is a risk of electrical shock if you are not careful. Make sure to disconnect the battery before you begin working on the speed limiter.
Damage to the golf cart. If you are not careful, you could damage the golf cart while removing the speed limiter. Be sure to follow the instructions carefully and use the proper tools.
Injury. There is always a risk of injury when working on a golf cart. Be sure to wear safety glasses and gloves to protect yourself.

By being aware of the potential risks and complications, you can help to avoid them and safely remove the speed limiter from your EZGO golf cart.

FAQ

Q: What are the risks of removing a speed limiter?

A: There are a few risks associated with removing a speed limiter. First, if the speed limiter is not removed properly, it could damage the golf cart’s engine. Second, removing the speed limiter could make the golf cart more difficult to control, especially at high speeds. Third, removing the speed limiter could void the golf cart’s warranty.

Q: Can I remove the speed limiter myself?

A: It is possible to remove the speed limiter yourself, but it is important to be careful and to follow the instructions carefully. If you are not comfortable doing this yourself, you can take your golf cart to a qualified technician.

Q: What are the benefits of removing a speed limiter?

A: There are a few benefits to removing a speed limiter. First, it can allow you to increase the speed of your golf cart. Second, it can make the golf cart more responsive and easier to control. Third, it can make the golf cart more fun to drive.

Q: How much does it cost to remove a speed limiter?

A: The cost of removing a speed limiter can vary depending on the type of golf cart and the location of the technician. Typically, the cost ranges from $50 to $100.

Q: What is the difference between a speed limiter and a governor?

A: A speed limiter is a device that limits the maximum speed of a golf cart. A governor is a device that regulates the speed of a golf cart. Governors are typically used to maintain a constant speed, while speed limiters are used to limit the maximum speed.
Conclusion

In this article, we have discussed how to remove a speed limiter from an EZGO golf cart. We have provided step-by-step instructions and information on the tools and materials you will need. We have also discussed the potential risks and complications of removing a speed limiter.

We hope that this article has been helpful. If you have any questions, please feel free to leave a comment below.

How to Remove a Speed Limiter from an EZGO Golf Cart

Introduction

A speed limiter is a device that is installed on some golf carts to limit the maximum speed of the cart. This is done for a variety of reasons, such as safety or to comply with local regulations. However, there are some situations where you may want to remove the speed limiter from your golf cart, such as if you want to increase the speed of the cart or if the limiter is not working properly.

What is a speed limiter?

A speed limiter is a device that is installed on some golf carts to limit the maximum speed of the cart. The limiter is typically a mechanical device that works by either limiting the amount of fuel that can be delivered to the engine or by limiting the speed of the engine’s crankshaft.

Why would you want to remove a speed limiter?

There are a few reasons why you might want to remove the speed limiter from your golf cart.

You want to increase the speed of the cart.
The limiter is not working properly.
You are in a situation where you need to be able to travel at a faster speed than the limiter allows.

How to remove a speed limiter from an EZGO golf cart

To remove the speed limiter from an EZGO golf cart, you will need the following tools and materials:

A socket wrench set
A screwdriver
A pair of pliers
A wire cutter

Follow these steps to remove the speed limiter:

Locate the speed limiter on the golf cart. It is typically located on the engine block.
Disconnect the battery from the golf cart.
Remove the bolts that hold the speed limiter in place.
Disconnect the wires from the speed limiter.
Remove the speed limiter from the golf cart.

Once you have removed the speed limiter, you can reconnect the battery and test the golf cart to make sure that it is working properly.

Potential risks and complications

There are a few potential risks and complications associated with removing the speed limiter from a golf cart.

You could damage the golf cart if you do not remove the speed limiter properly.
You could increase the risk of an accident if you drive the golf cart at a speed that is too fast for the conditions.

It is important to weigh the risks and benefits of removing the speed limiter before you decide to do it. If you are not sure whether or not you should remove the speed limiter, you should consult with a qualified mechanic.

FAQ

Q: What are the three most common reasons why people remove speed limiters from their golf carts?

To increase the speed of the cart.
The limiter is not working properly.
The person is in a situation where they need to be able to travel at a faster speed than the limiter allows.

Q: What are the potential risks and complications associated with removing the speed limiter from a golf cart?

You could damage the golf cart if you do not remove the speed limiter properly.
You could increase the risk of an accident if you drive the golf cart at a speed that is too fast for the conditions.

Q: What is the best way to remove a speed limiter from an EZGO golf cart?

Locate the speed limiter on the golf cart. It is typically located on the engine block.
Disconnect the battery from the golf cart.
Remove the bolts that hold the speed limiter in place.
Disconnect the wires from the speed limiter.
Remove the speed limiter from the

Total

0

Shares

Share 0

Tweet 0

Pin it 0

Share 0
- Author
- Recent Posts
Owen Wilson
Hello, fellow golf enthusiasts! Owen Wilson here, your guide through the vast greens and fairways of the golfing universe on "forever-golf.com". Golf has been my passion for as long as I can remember, and being able to share my insights and experiences with you all is an absolute joy.
Latest posts by Owen Wilson (see all)

Where Was the First Topgolf in the English Language - April 5, 2024

Topgolf Back Net Distance How Far Is It - April 5, 2024

Top Golf Where to Find the Best Golf Experiences Outside of the U.S. - April 5, 2024